Waverunner

Pitch Cynlinder Evacuation Procedure

Problem: Insufficient pressure settings have caused an error E3 or E4 on power up.

1. Remove air from system by either evacuating Tank or disconnecting air from Motion base.

2. Disconnect four hoses to Pitch Cylinder at 2 Port Air Valves. ( Red, Clear, Black, Blue)

3. Raise and lower Waverunner Body just to verify Cylinder is moving freely and nothing else is binding.

4. Reconnect the four hoses to Valves in same positions they were removed from.

5. Pressurize system and verify .6 and .3 mpa at Regulators in Motion base.